Somerville Indiana Construction Expert Witness Directory

Pulling the Plug, Preserving the Product: Protecting Rights to a Modular Subcontractor’s Work Post-Termination

June 08, 2026 — Paul Williamson - ConsensusDocs
Volumetric Modular Construction (VMC) is a building method where a structure is divided into large components or modules, fabricated in an offsite factory and then transported to a construction site for assembly.[1] Proponents of VMC hail it as a cost-efficient alternative to traditional building methods that leads to more consistent quality and shorter construction duration.[2] Due to a growing labor shortage, high demand for compressed project schedules, and stagnant construction productivity rates, the construction industry is embracing VMC.[3] A recent report on the market size of prefabricated construction estimates that from 2026 to 2031, VMC will grow at a compound annual growth rate of 7.16% and become a 413.11-billion-dollar industry.[4] As VMC becomes more prevalent, owners, general contractors, and subcontractors must consider how to effectively contract for modular construction. One important consideration, which this article focuses on, is navigating termination of a modular subcontractor. Read the full story...
Reprinted courtesy of Paul Williamson, Peckar & Abramson, P.C.
Mr. Williamson may be contacted at pwilliamson@pecklaw.com

Nicole Whyte is the Newly Elected Secretary of the Orange County Bar Association

September 28, 2026 — Dolores Montoya - Bremer Whyte Brown & O'Meara LLP
“I am deeply honored to serve as Secretary of the Orange County Bar Association. To everyone who supported me, endorsed me, encouraged me, shared my message, and cast a ballot, thank you. I am profoundly grateful for your trust and confidence. Thank you from the bottom of my heart. I am ready to get to work.” – Nicole Whyte Read the full story...
Reprinted courtesy of Bremer Whyte Brown & O'Meara LLP

New Survey Reveals Overwhelmingly Optimistic Results on the Use of AI in Construction

May 14, 2026 — Construction Executive
On December 5, 2025, CMiC and Dodge released a survey asking over 6,000 companies across various sectors of the construction industry their stance on artificial intelligence—whether they use it or not; whether they like it or not; whether they have or are planning to implement it or not; and so on. Considering its reputation for skepticism and reluctance when it comes to adopting new forms of technology, the construction industry pleasantly surprised CMiC and Dodge with its answers to these questions, with 87% of contractors believing AI will have a meaningful impact on construction. “The research indicates the construction industry is nearing a tipping point for AI adoption,” says Steve Jones, senior director of industry insights at Dodge Construction Network, who sat down with Construction Executive to delve further into the survey questions and answers and what the industry’s current position on them means for AI’s future role in construction. Reprinted courtesy of Construction Executive, a publication of Associated Builders and Contractors. All rights reserved. Read the full story...

Insured Does Not Prevail on Summary Judgment Motion Invoking Ensuing Loss Provision

May 05, 2026 — Tred R. Eyerly - Insurance Law Hawaii
The court denied the insured’s motion for summary judgment finding genuine issues of fact regarding implication of the policy’s ensuing loss provision. Stella Prop. Dev.. & Event Productions, LLC v. Auto-Owners Ins. Co., 2026 U.S. Dist. LEXIS 15854 (W.D. Pa. Jan. 28, 2026). Stella owned a cultural center that was insured under a commercial property all-risk policy issued by Auto-Owners. A windstorm with gusts of 65 miles per hour struck the Center causing damage. The Center’s inspector found extensive wind damage on nearly all facets of the roof. Further, the inspector found the existing organic shingles were in “very poor condition” and were “defective, discontinued, and no longer available.” The estimated cost of repairs to the roof was $108,010.52. Read the full story...
Reprinted courtesy of Tred R. Eyerly, Damon Key Leong Kupchak Hastert
Mr. Eyerly may be contacted at te@hawaiilawyer.com

Doctrine of Substantial Performance When It Comes to Payment

July 27, 2026 — David Adelstein - Florida Construction Legal Updates
A recent non-construction case touches upon the doctrine of substantial performance when it comes to payment. In this case, a club was to make two payments to secure a rapper’s attendance. The first payment was made. The second payment was made but was a few hundred dollars short of the agreed amount. The rapper did not show up. The club claimed it substantially performed its obligations. At first glance, the argument makes sense because the second payment fell only a few hundred dollars short. But that wasn’t the case when it comes to pre-commencement payment obligations:

Substantial performance applies only when the variance from the contract terms “is inadvertent or unintentional and unimportant so that the work actually performed is substantially what was called for in the contract.” However, when one party agrees to pay the other on or before a specific date, time is of the essence, and the payor is required to pay the payee on or before that date. “There is almost always no such thing as ‘substantial performance’ of payment between commercial parties when the duty is simply the general one to pay. Payment is either made in the amount and on the date due, or it is not.”

Big Gate Records, LLC v. Washington, 51 Fla.L.Weekly D1281a (Fla. 2nd DCA 2026) (internal citations omitted).

Read the full story...
Reprinted courtesy of David Adelstein, Kirwin Norris
Mr. Adelstein may be contacted at dma@kirwinnorris.com

$10.5M Settlement Ends George Washington Bridge Debris Liability Fight

September 15, 2026 — Bryan Gottlieb - Engineering News-Record
A $10.5-million settlement that recently came to light has ended a six-year legal fight over whether a truck part that may have been lying on the George Washington Bridge roadway for more than 10 minutes was there long enough for the Port Authority of New York and New Jersey to have found and removed it before it caused a catastrophic accident. Read the full story...
Reprinted courtesy of Bryan Gottlieb, Engineering News-Record
Mr. Gottlieb may be contacted at gottliebb@enr.com

Achieving Sustainability Through Design Build Delivery: Part II – A Framework for Managing Sustainability Objectives on Private Commercial Construction

October 06, 2026 — Jennifer Harris, Tiffany Harrod & Joshua Pruett - ConsensusDocs
Part I of this series traced the history and development of sustainability in construction and explained why design-build (“DB”) contracting is particularly well suited to achieve sustainability objectives. But selecting DB contracting does not by itself ensure a sustainable outcome. The parties must define their sustainability objectives with precision, establish measurable performance criteria and identify who will measure compliance with the criteria, and also draft contract terms that clearly and fairly allocate the associated responsibilities and risks. Otherwise, the completed project may fall short of its sustainability objectives and expose the parties to claims, disputes, and litigation. Part II offers a non-exhaustive list of practical guidance for addressing these issues and reducing those risks. This article references the ConsensusDocs 310 Green Building Addendum, in conjunction with an agreement between the Owner and the Design-Builder (e.g., ConsensusDocs 415)[1], [2] and AIA Document E204–2017 Sustainable Projects Exhibit,[3] together with AIA A141,[4] as its contractual baseline. The five-part framework that follows is a roadmap for allocating sustainability risk between private owners and design-builders: define the requirements, identify hidden performance guarantees, map out the sustainable objective, address third-party certification risk, and track performance against agreed benchmarks. Reprinted courtesy of Jennifer Harris, Peckar & Abramson, P.C., Tiffany Harrod, Peckar & Abramson, P.C. and Joshua Pruett, Peckar & Abramson, P.C. Ms. Harris may be contacted at jharris@pecklaw.com Ms. Harrod may be contacted at tharrod@pecklaw.com Mr. Pruett may be contacted at jpruett@pecklaw.com Read the full story...

The GKN Aerospace Chemical Release and the Laws Designed to Address It

July 06, 2026 — Sean M. Sherlock - Snell & Wilmer
On May 21, 2026, a 34,000-gallon storage tank at the GKN Aerospace facility in Garden Grove, California began leaking methyl methacrylate (MMA), a volatile and highly flammable industrial chemical used to manufacture high-strength acrylic plastics. GKN Aerospace makes advanced military and commercial transparencies, such as aircraft canopies, windshields, cabin windows, bullet-resistant glass, and spacecraft windows. In polymer chemistry lingo, MMA is known as a monomer. Monomers are like individual links to a chain. Under the right conditions they link up (react) with each other to form long-chained polymers, or plastics. MMA is an unstable monomer that requires controlled storage conditions to avoid setting off a polymerization (chain) reaction. According to early reports, the MMA tank at GKN Aerospace overheated. The cause of the overheating is not yet clear, but the overheating may have created conditions enabling the MMA to initiate polymerization, which in turn generated heat, which in turn generated pressure, activating the tank’s pressure-relief system and releasing MMA vapor into the atmosphere. Concerns about a runaway reaction, massive release, and explosion led the Orange County Fire Authority to order evacuation of approximately 40,000 residents and closure of thirteen schools. Read the full story...
Reprinted courtesy of Sean M. Sherlock, Snell & Wilmer
Mr. Sherlock may be contacted at ssherlock@swlaw.com

SOMERVILLE INDIANA CONSTRUCTION EXPERT WITNESS DIRECTORY AND CAPABILITIES