White and Williams LLP Attorneys Recognized as PA and DE Super Lawyers
July 06, 2026 —
White and Williams LLPWhite and Williams LLP is proud to announce that eight attorneys in the firm’s Philadelphia office and one attorney in the firm's Delaware Office have been recognized on the 2026 Super Lawyers® and Rising Star lists. This recognition highlights our attorney's exceptional legal acumen and their commitment to client service excellence.
Lawyers are selected for inclusion in Pennsylvania and Delaware Area Super Lawyers® and Rising Stars through a process that considers independent research, peer recognition and the professional achievements of attorneys from more than 70 practice areas. Approximately 2.5% of lawyers in each state are selected by the research team at Super Lawyers® to receive this honor.
Read the full story...Reprinted courtesy of
White and Williams LLP
Sixth Circuit Revives Builder’s Risk Coverage, Refusing to Let Insurer Escape on a Technicality
July 27, 2026 —
Kevin V. Small & Adriana A. Perez - Hunton Insurance Recovery BlogIn 3371 Reading, LLC v. Liberty Mutual Group, the Sixth Circuit did something courts do not always do in coverage disputes: it refused to let an insurer avoid liability based on a technical policy condition that could never actually be satisfied.
The decision is a straightforward reminder of two core principles. First, policies must be interpreted from the standpoint of a reasonably prudent insured. Second, hyper-technical conditions cannot be used to deny coverage where compliance is never possible.
Reprinted courtesy of
Kevin V. Small, Hunton Andrews Kurth LLP and
Adriana A. Perez, Hunton Andrews Kurth LLP
Mr. Small may be contacted at ksmall@hunton.com
Ms. Perez may be contacted at pereza@hunton.com
Read the full story...
Brenda Radmacher Authors Chapter in ABA Publication on Construction Delays
May 26, 2026 —
Brenda Radmacher - The Construction SeytBrenda Radmacher, a partner in Seyfarth’s Construction Law practice and a mediator and arbitrator serving on the American Arbitration Association’s panels, is among the contributing authors to the American Bar Association’s forthcoming guide on construction disputes: Time – The Legal Implications of Project Delay in Construction.
Drawing on three decades of experience, Radmacher authors Chapter 8, Contractor Delay Damages, offering practical insight into one of the most contested issues in construction litigation and arbitration.
Read the full story...Reprinted courtesy of
Brenda Radmacher, Seyfarth Shaw LLP
Cal Unity Bar Names Angela Zanin as Statewide President
August 11, 2026 —
Lewis BrisboisThe California Unity Bar has named Los Angeles Partner Angela Zanin as its statewide president for the 2026-2027 term. This appointment follows Ms. Zanin's extensive involvement in the organization, including as the founding co-chair of the Los Angeles County Unity Bar in 2024 and as its chair for the 2024-2025 term. Ms. Zanin also has served as a member of the Executive Steering Committee of the California Unity Bar since 2025.
In her inaugural message as president, which the Cal Unity Bar published in its newsletter of July 2026, Ms. Zanin stated that she vowed to continue the organization’s “commitment to promoting equal opportunities and embracing diversity, equity, and inclusion in the State of California.” She also noted that as she assumed the role of president, she thought of “the famous words of Dr. Martin Luther King, Jr.: ‘The arc of the moral universe is long, but it bends toward justice.”’ Ms. Zanin closed her message by observing, “At a time when the rule of law faces challenges, our alliance stands strong, built on trust and confidence in each other.”
Read the full story...Reprinted courtesy of
Lewis Brisbois
Surety Requiring Collateral Security Under General Agreement of Indemnity
September 08, 2026 —
David Adelstein - Florida Construction Legal UpdatesIn order to procure bonds (payment and performance bonds), you need to sign a General Agreement of Indemnity (referred to as the “GAI”) with the surety (bonding company). It does not matter the surety issuing the bonds, the terms and conditions in the General Agreement of Indemnity are largely consistent. These terms and conditions are one-sided written in favor of the surety. This is because bonds are not insurance. When a surety issues such bonds, it is doing so under the premise that it will get reimbursed every penny that it incurs relative to its exposure- whether incurred in attorney’s fees, consulting costs, or remediating a default or claim under the applicable bond. The General Agreement of Indemnity is one of the most powerful contracts in construction and is a contract that is not to be taken lightly. It provides the surety numerous rights in the event of a claim.
Read the full story...Reprinted courtesy of
David Adelstein, Kirwin NorrisMr. Adelstein may be contacted at
dma@kirwinnorris.com
The Deadline to File Suit on a Public Works Payment Payment Bond is Triggered by a Claimant’s Work on a Project Not by a Claimant’s Work Under a Contract
June 02, 2026 —
Garret D. Murai - California Construction Law BlogCalifornia law requires that prime contractors furnish a payment bond – providing for payment to lower-tiered subcontractors and suppliers – on state and local public works projects with a value in excess of $25,000. There are three conditions that must be satisfied when a claimant makes a claim against a payment bond on a public works project in California:
- First, generally, the claimant must have served a preliminary notice, unless the claimant is a first-tier subcontractor or supplier;
- The claimant must have “ceased to provide work” on the project; and
- The claimant must file suit against the payment bond no later than six (6) months after the period in which a stop payment notice must be given or, in other words, the earlier of 270 days after completion of the public works project or 210 days after a notice of completion or cessation was recorded on a public works project.
In
Tarlton & Sons, Inc. v. Great American Insurance Company, 111 Cal.App.5th 376 (2025), the 2nd District Court of Appeal examined whether a subcontractor timely filed a claim against a payment bond when a prime contractor was terminated and replaced by another prime contractor who the subcontractor continued to perform work for.
Read the full story...Reprinted courtesy of
Garret D. Murai, Nomos LLPMr. Murai may be contacted at
gmurai@nomosllp.com
Humanoid Robots in Construction: The Reality Right Now
October 12, 2026 —
Aarni Heiskanen - AEC BusinessHumanoid robots are getting a lot of media attention. Videos of robots doing backflips and kung fu moves suggest that a general-purpose machine worker is just around the corner. A recent visit by the Finnish technology magazine
Tekniikka&Talous to crane manufacturer
Konecranes offers a more sober picture. I think it is a useful reality check for anyone in the AEC industry wondering what humanoids can actually do today.
What a Humanoid Can Do in a Controlled Environment
Konecranes bought a
Unitree G1 EDU humanoid in autumn 2025, likely as the first Finnish industrial company to do so. With separately purchased five-finger hands and other extras, the price came close to €100,000.
Read the full story...Reprinted courtesy of
Aarni Heiskanen, AEC BusinessMr. Heiskanen may be contacted at
aec-business@aepartners.fi
"Resilient Rebuild Hub" Helps Wildfire-Impacted Homeowners Build Back Stronger
September 21, 2026 —
California Nevada Cement AssociationNEWPORT BEACH, Calif., Sept. 21, 2026 /PRNewswire/ -- When homeowners in a fire-ravaged Pacific Palisades neighborhood banded together last year to rebuild with fire-hardened materials rather than standard wood framing, they weren't just rebuilding houses: they were rewriting the playbook for how California communities can rebuild after wildfire. Today, the Building with Resilience effort is making that playbook available to every homeowner facing the same decision with the launch of its new Resilient Rebuild Hub for exploring fire resistant, non-combustible construction options.
The Resilient Rebuild Hub helps homeowners understand options for fire-resistant, concrete-based construction and connect with architects, engineers, and contractors who can build them. This includes six noncombustible building systems:
- Insulated Concrete Forms (ICF): stackable, high-density foam blocks filled with concrete which save 20-50% on monthly heating and cooling costs, reduce outside noise by up to 80%, offer exceptional earthquake performance and 4-hour fire resistance rating.
- Insulated Composite Concrete Forms (ICCF): similar formwork to ICF construction with composite materials that enhance strength, simplify installation, and improve long-term performance.
- Concrete Masonry: strong, durable wall systems used for decades across California and the U.S.
- Precast Insulated Sandwich Panels: a complete building enclosure system consisting of two layers of concrete separated by a continuous layer of rigid insulation.
- 3D Shotcrete: air-sprayed concrete for strong, fast, and versatile wall systems that enable a high degree of artistic freedom together with unparalleled fire resistance.
- 3D Concrete Printing: the cutting edge of residential construction, a large-scale robotic 3D printer "squeezes" a specialized concrete mixture layer by layer to allow for organic, curved designs that are often too expensive or impossible to build with traditional methods.
The Resilient Rebuild Hub is available now at buildingwithresilience.com/how-to-build. Each part is free to access and includes case studies, technical resources, and a directory of architects, engineers, and contractors experienced in each building method.
CNCA is a not-for-profit organization committed to developing sustainable and economical construction solutions for California and Nevada with an emphasis on the use of cement and concrete. For more information, visit www.cncement.org.
CalCIMA is a trade association for the construction and essential mineral industries in California, including aggregate, essential and rare earth minerals, ready mixed concrete, and asphalt producers. In all, there are about 70 producer member companies that include 500 production sites in every county of California. Our members also include more than 100 suppliers and service providers to the industry.
Founded in 1930, the National Ready Mixed Concrete Association (NRMCA) is the leading industry advocate with a mission to provide exceptional value for our members by responsibly representing and serving the entire ready mixed concrete industry through leadership, promotion, education and partnering to ensure ready mixed concrete is the building material of choice.
