EAU GALLE WISCONSIN CONSTRUCTION EXPERT WITNESS
DIRECTORY AND CAPABILITIES

Every High-Tech Building Has Many Lifespans

August 16, 2026 — Aarni Heiskanen - AEC Business
When I worked as an architect, our team designed a laboratory for fuel research. The facility included a large research hall where various boilers and other devices were tested and analyzed. The setup required extensive floor channeling under the thick concrete floor. We suggested building a modular system that would allow flexibility in the future, when requirements would certainly change. They did not want that because of budget constraints. The high-tech construction trend is spreading. Data centers, semiconductor fabs, battery plants, and life science facilities share one property that sets them apart from ordinary buildings. The technology inside turns over faster than the structure around it. Server generations change every three to five years. Rack densities have risen from 10 or 20 kW to 130 kW and beyond in just a few years. A high-tech facility is really several buildings with different lifespans inside one envelope, and we keep designing them as if they were one. The failure is not that things become obsolete. It is that we never say when each layer is expected to. Read the full story...
Reprinted courtesy of Aarni Heiskanen, AEC Business
Mr. Heiskanen may be contacted at aec-business@aepartners.fi

---

Course of Construction Exclusions and the CGL Policy

July 20, 2026 — Anna M. Perry, Rachel S. Kindseth & Nina Catanzaro - Saxe Doernberger & Vita, P.C.
I. Course of Construction Exclusions Course of Construction (“COC”) exclusions are found on General Liability and excess liability policies, typically a wrap-up or project specific policy, and generally exclude “all property damage occurring during the course of construction.” Insurers claim COC exclusions are not problematic because they are intended to prevent an overlap in coverage between the general liability policy and first-party property Builder’s Risk policy. However, because General Liability policies and Builder’s Risk policies provide coverage for different risks, COC exclusions can create a gap in coverage for owners and contractors. Therefore, any exclusion on a wrap-up or project specific policy that limits coverage for property damage liability should be scrutinized, and amendments sought when warranted and commercially achievable, for owners, developers and contractors because General Liability policies do not cover the same risk as that of a Builder’s Risk policy. General liability policies provide defense and indemnity to the insured(s) for claims made by a third-party against the insured. Broad COC exclusions serve to preclude coverage for all property damage, not just property damage to the insured project. This includes property damage to property other than the insured project, e.g. an adjacent property. On the other hand, Builder’s Risk policies provide first-party property coverage for direct physical loss to the project during the course of construction. The Builder’s Risk policy will not provide coverage for property other than the project itself (e.g., adjacent property) and it will not provide a defense or indemnity in the event the owner of the damaged property brings a claim against a potentially at-fault party. Reprinted courtesy of Anna M. Perry, Saxe Doernberger & Vita, P.C., Rachel S. Kindseth, Saxe Doernberger & Vita, P.C. and Nina Catanzaro, Saxe Doernberger & Vita, P.C. Ms. Perry may be contacted at APerry@sdvlaw.com Ms. Kindseth may be contacted at rkindseth@sdvlaw.com Ms. Catanzaro may be contacted at NCatanzaro@sdvlaw.com Read the full story...

---

How Mobile Tools Are Capturing Safety Data on Jobsites

April 08, 2026 — Michael Bruns - Construction Executive
Traditionally, construction safety management is “reactive compliance”—reporting on an incident, filling out a form on paper or electronically, taking a picture and filing it away for compliance purposes. Safety management is shifting from reactive to proactive. Forward-thinking companies are using data and leading indicators to identify risks before incidents happen, not just document injuries after the fact. Mobile tools have completely changed the way safety operations work on construction sites, enabling that transition to proactive safety management. Reprinted courtesy of Michael Bruns, Construction Executive, a publication of Associated Builders and Contractors. All rights reserved. Read the full story...

---

California Poised for the Most Significant Residential Construction Defect Reforms in Decades

September 01, 2026 — Thomas D. Fama & Andrew J. Mallon - Wood Smith Henning Berman
The California Legislature is considering legislation that would dramatically alter the landscape of residential construction defect litigation. Assembly Bill 1903, currently pending before the Senate Judiciary Committee, proposes extensive amendments to California's Right to Repair Act (Civil Code sections 895-945.5) that would substantially strengthen procedural protections for builders while narrowing the scope of recoverable construction defect claims. If enacted, the legislation would affect virtually every stage of a construction defect dispute- from the initial notice of claim through litigation and settlement- and would introduce an entirely new certification process for newly constructed condominium projects. This article details some of the most significant proposed changes. Higher Burden for Construction Defect Plaintiffs Perhaps the most consequential change is the bill's modification of the proof required to establish liability. current law generally requires a claimant to demonstrate the residence fails to satisfy one of the statutory performance standards established under the Right to Repair Act. AB1903 would instead require claimants to establish three separate elements:

• A violation of an applicable statutory performance standard;
• The violation caused appreciable, present, non-speculative physical damage to another building component; and
• The violation resulted from the original construction.

Reprinted courtesy of Thomas D. Fama, Wood Smith Henning Berman and Andrew J. Mallon, Wood Smith Henning Berman Mr. Fama may be contacted at tfama@wshblaw.com Mr. Mallon may be contacted at amallon@wshblaw.com Read the full story...

---

Wilke Fleury Attorneys Recognized by 2026 Northern California Super Lawyers and Rising Stars!

July 20, 2026 — Wilke Fleury
Wilke Fleury is pleased to announce that 18 of the firm’s attorneys have been selected for inclusion on the 2026 Northern California Super Lawyers and Rising Stars lists. The annual Super Lawyers and Rising Stars selections recognize attorneys across a wide range of practice areas. This year’s honorees reflect the depth of Wilke Fleury’s litigation, business, healthcare, employment, bankruptcy, appellate, real estate, construction, and estate planning practices. Read the full story...
Reprinted courtesy of Wilke Fleury

---

Location, Location, Location — But Which One? The Few Words in Your Construction Contract that Pick Where You Fight

June 29, 2026 — Brad Sands - ConsensusDocs
Most professionals know the old real estate line: location, location, location. It turns out to be just as true for construction contracts as it is for property. Consider a recent case involving a project owner that hired two design firms for a project. When issues arose during construction, the owner sued the design firms in state court in Brazoria County, Texas, pursuant to the forum selection clause in the parties’ contracts. The defendants then removed the case to the federal district court in Galveston, a courthouse in a different county. But the owner wanted the case back in Brazoria County state court. Whether it got its wish came down to two words in the contract: “situated in.” This article is about words like those. A construction contract’s forum selection clause names the place for the fight nobody plans to have, and where that fight happens can shape how it goes. This article explains why the wording in your forum selection clause deserves careful reading before you sign a construction contract. It is not a deep dive into the mechanics of federal removal jurisdiction, and it is not an academic comparison of the terms “forum” and “venue.” Instead, it is a practical look at how courts actually read these clauses, so the location of a future fight is the one you intended. Read the full story...
Reprinted courtesy of Brad Sands, Jones Walker, LLP
Mr. Sands may be contacted at bsands@joneswalker.com

---

Can Anything Supersede Excel in AEC?

April 27, 2026 — Aarni Heiskanen - AEC Business
If there’s one piece of software that dominates the business world across industries, it’s Microsoft Excel. Can AI finally dethrone the mighty spreadsheet? Memorable Spreadsheet Moments Everyone has memorable spreadsheet moments. I have a few. For example, my then-architecture firm was involved in more than a dozen housing developments abroad. I developed an Excel workbook that took the required number of households as input and automatically generated a breakdown of buildings and their apartment types for AutoCAD. This was urban planning and architectural design done with a spreadsheet. I also developed business software using Excel for project portfolio management. The prototype was later scaled into a commercial SaaS that is now used globally. Another memorable moment was when a property owner told me their Excel file grew so large that it ran out of rows and columns. That must have been before 2007, when the maximum number of columns on a sheet was still just 256 and the maximum number of rows was 65,536. The current limits are 1,048,576 rows and 16,384 columns, which I hope no one will exceed. Read the full story...
Reprinted courtesy of Aarni Heiskanen, AEC Business
Mr. Heiskanen may be contacted at aec-business@aepartners.fi

---

Emerging Issues in Construction CGL Insurance Part 2: The Separation of Insureds and Additional Insured Interests

September 29, 2026 — Eric M. Clarkson - SDV Fenchurch
Many coverage disputes hinge on first principles—the fundamentals of insurance —rather than the minutiae. Unfortunately, the basic anatomy of insurance policies can get lost sometimes when parties are laser-focused on a particular term or set of circumstances. This is true not just in disputes, but also when writing coverage. One of the fundamentals that is commonly misunderstood and overlooked—but which is absolutely critical to the intended operation of insurance coverage—is what is commonly known as the “separation of insureds.” The “separation of insureds” is the concept that each “insured” under a policy are referred to and treated differently, and most of all that the distinctions matter. The concept is usually included as a condition in the policy. It embodies the requirement that the policy applies to each insured distinctly from how it applies to other insureds. The ISO Form CGL policies specifically state that they apply “[s]eparately to each insured against whom a claim is made or ‘suit’ is brought.” The separate and distinct treatment of insureds is more critical in construction operations than anywhere else. This distinction is essential to ensure coverage works as intended, especially when contracted operations are involved, because the policy must insure the subcontractor that purchased the policy, the general contractor who hired the subcontractor, and the owner that hired the general contractor. Even small modifications can easily frustrate the intent of the parties. Read the full story...
Reprinted courtesy of Eric M. Clarkson, SDV Fenchurch
Mr. Clarkson may be contacted at eric.clarkson@sdvfenchurch.us

---