Anaheim California Construction Expert Witness Directory

The AVOID Act: A New Timeline for Liability in New York Construction Projects

February 23, 2026 — Meghan Douris - The Construction Seyt
By April 18, 2026, New York construction litigation will operate on a faster—and far less forgiving—timeline. The Avoiding Vexatious Overuse of Impleading to Delay (the “AVOID Act”), signed into law on December 19, 2025, fundamentally rewrites third‑party practice under CPLR § 1007 by imposing strict deadlines to bring subcontractors, suppliers, and other responsible parties into a case. For owners, developers, general contractors, and their in‑house counsel, this change will shift risk assessment, contract enforcement, and litigation strategy to the very front end of a claim—particularly in New York Labor Law and construction defect cases. What Changed—and Why It Matters to Construction Cases Historically, New York defendants could implead subcontractors and other players well into discovery. The AVOID Act ends that practice. Read the full story...
Reprinted courtesy of Meghan Douris, Seyfarth Shaw LLP
Ms. Douris may be contacted at mdouris@seyfarth.com

Traub Lieberman Attorneys Recognized as 2026 Illinois Super Lawyers® and Rising Stars

February 02, 2026 — Traub Lieberman
Traub Lieberman is pleased to announce that two Partners from the Chicago, IL office have been selected to the 2026 Illinois Super Lawyers list. In addition, two Associates have been named to the 2026 Super Lawyers Rising Stars list. 2026 Illinois Super Lawyers

Brian Bassett – Insurance Coverage
Dana Rice – Insurance Coverage

2026 Super Lawyers Rising Stars

Timothy Crane – Insurance Coverage
Anthony Morelli – Civil Litigation

Read the full story...
Reprinted courtesy of Traub Lieberman

Micromobility in Smart Cities: Keeping the Wheels in Motion

May 26, 2026 — James P. Bobotek - Gravel2Gavel Construction & Real Estate Law Blog
Mobility is the lifeblood of any city. How people are able to travel in, out and within a metropolitan area is vital to its citizens, businesses, supply chains and social services. And as U.S. cities have expanded in size and population density, the strategies for addressing mobility have evolved. Many have taken different approaches to public transit, and each city boasts a dense tapestry of roadways, walking paths and various parking options. But as cities continue to reexamine infrastructure strategies through smart city technology, a new field of transportation has emerged—micromobility. Designed for short-distance travel using lightweight vehicles (bikes, e-bikes, e-scooters, etc.), the industry’s global net worth has grown exponentially in recent years to the tune of hundreds of billions, with one forecast predicting it could reach $340 billion by 2030. Micromobility also finds itself at the forefront of various smart city technological improvements. Geofencing has been implemented in U.S. cities to determine where micromobility vehicles can operate, control speed limits, and park utilizing the vehicles’ GPS location. Internet of Things (IoT) technologies (satellite-based location receivers, cloud communication, internet links, etc.) have improved vehicle lifespans by keeping track of when vehicles require service and prevent vandalism and theft. Data collected from vehicles’ location tracking is routinely used for urban planning and smart city development. Read the full story...
Reprinted courtesy of James P. Bobotek, Pillsbury
Mr. Bobotek may be contacted at james.bobotek@pillsburylaw.com

Applying Jury Verdict Method in Quantifying Damages Due to Defective Specifications

March 31, 2026 — David Adelstein - Florida Construction Legal Updates
An older case deals with three important considerations: (1) defective specifications; (2) whether the defective specifications were misleading or misrepresentative; and (3) applying the jury verdict method in quantifying damages. In Metric Construction Co., Inc. v. U.S., 80 Fed. Cl. 178 (Fed. Cl. 2008), a contractor was contracted by the federal government to construct a warehouse. There were defects in the structural steel design specifications underlying the standing seam metal roof installed by the contractor and, as a result, the roof system leaked causing damage. The contractor incurred significant costs in repairing the damage, and pursued recovery of these costs against the government. The contractor claimed the structural steel design serving as the framework for the metal roof was defective and misleading and caused the leaks. Read the full story...
Reprinted courtesy of David Adelstein, Kirwin Norris
Mr. Adelstein may be contacted at dma@kirwinnorris.com

PJM’s Reliability Backstop Procurement Proposal—Fast-Track Capacity to Meet Rising Large-Load Demand

May 12, 2026 — Stephen J. Humes, Alicia M. McKnight, Jason Drogin Atwood & Andrew H. Jacobs - Gravel2Gavel
In January, we discussed the Statement of Principles jointly signed by the National Energy Dominance Council and governors across the mid-Atlantic region—framing accelerating demand (especially from large-scale data centers) as an emergency reliability issue for PJM Interconnection, L.L.C. (PJM), the nation’s largest power grid operator. That policy signal is now becoming a near-term, accelerated procurement and contracting exercise. On April 8, 2026, PJM notified stakeholders of a critical issue fast path reliability backstop procurement process. PJM subsequently released a request for information (RFI) with respect to a proposed Reliability Backstop Procurement (RBP)—a one-time mechanism intended to attract significant new capacity to address projected reliability shortfalls driven by large-load growth. RBP compresses what is often a multiyear market and regulatory conversation into a fast-moving set of commercial choices. Developers, large loads, utilities and capital providers should be preparing now for (i) an accelerated bilateral contracting window and (ii) a standardized PJM-led backstop procurement if bilateral deals do not clear enough capacity. Reprinted courtesy of Stephen J. Humes, Pillsbury, Alicia M. McKnight, Pillsbury, Jason Drogin Atwood, Pillsbury and Andrew H. Jacobs, Pillsbury Mr. Humes may be contacted at stephen.humes@pillsburylaw.com Ms. McKnight may be contacted at alicia.mcknight@pillsburylaw.com Mr. Atwood may be contacted at jason.atwood@pillsburylaw.com Mr. Jacobs may be contacted at andrew.jacobs@pillsburylaw.com Read the full story...

HHMR Attorneys Steve Heisdorffer and Dave McLain Named to 2026 Super Lawyers List

April 08, 2026 — Higgins, Hopkins, McLain & Roswell, LLC
Higgins, Hopkins, McLain & Roswell, LLC is pleased to announce that Steve Heisdorffer and Dave McLain have been selected to the 2026 Colorado Super Lawyers list for construction litigation. Mr. Heisdorffer has been consistently recognized in recent years for his work in construction litigation and related business disputes. Mr. McLain has been recognized by Super Lawyers each year from 2020 through 2026, following his earlier inclusion on the Rising Stars list from 2009 through 2012. Read the full story...
Reprinted courtesy of Higgins, Hopkins, McLain & Roswell, LLC

The GKN Aerospace Chemical Release and the Laws Designed to Address It

July 06, 2026 — Sean M. Sherlock - Snell & Wilmer
On May 21, 2026, a 34,000-gallon storage tank at the GKN Aerospace facility in Garden Grove, California began leaking methyl methacrylate (MMA), a volatile and highly flammable industrial chemical used to manufacture high-strength acrylic plastics. GKN Aerospace makes advanced military and commercial transparencies, such as aircraft canopies, windshields, cabin windows, bullet-resistant glass, and spacecraft windows. In polymer chemistry lingo, MMA is known as a monomer. Monomers are like individual links to a chain. Under the right conditions they link up (react) with each other to form long-chained polymers, or plastics. MMA is an unstable monomer that requires controlled storage conditions to avoid setting off a polymerization (chain) reaction. According to early reports, the MMA tank at GKN Aerospace overheated. The cause of the overheating is not yet clear, but the overheating may have created conditions enabling the MMA to initiate polymerization, which in turn generated heat, which in turn generated pressure, activating the tank’s pressure-relief system and releasing MMA vapor into the atmosphere. Concerns about a runaway reaction, massive release, and explosion led the Orange County Fire Authority to order evacuation of approximately 40,000 residents and closure of thirteen schools. Read the full story...
Reprinted courtesy of Sean M. Sherlock, Snell & Wilmer
Mr. Sherlock may be contacted at ssherlock@swlaw.com

When Your Scheduler Hallucinates: Managing AI Risk on the Job Site

March 03, 2026 — Jason Loring - ConsensusDocs
Artificial intelligence has moved from the conference room to the construction site. Contractors are using AI-powered tools to predict schedule delays, monitor safety through drone footage, optimize equipment maintenance and flag potential hazards in real time. These tools deliver genuine efficiency gains, but they also introduce risks that most construction contracts do not anticipate and many project teams aren’t yet equipped to manage. The problem is that AI tools are probabilistic and not determinative, meaning that they can “hallucinate”: generating confident, but completely wrong, information. Your AI scheduling software might therefore predict a delay that never materializes, causing unnecessary resource mobilization. Your drone monitoring might flag a nonexistent safety hazard, stopping work and costing productivity. Or worse, it might miss a real hazard entirely. Read the full story...
Reprinted courtesy of Jason Loring, Jones Walker LLP
Mr. Loring may be contacted at jloring@joneswalker.com

ANAHEIM CALIFORNIA CONSTRUCTION EXPERT WITNESS DIRECTORY AND CAPABILITIES