Preventing Common and Costly Water Intrusion Events in Construction
July 13, 2026 —
Andrew Swift - Construction ExecutiveWater leaking into a building is a leading cause of
damage and loss in the construction industry. On one jobsite, heavy rains flooded a sub-basement, damaging a new electrical transformer—all because a roof drain was not property connected. On another jobsite, a drinking-fountain supply line broke in a multistory building that was undergoing renovation, causing water to run—undetected—for an entire weekend, resulting in water damage to all lower floors, where construction had been finished.
Those loss scenarios could have been prevented with a comprehensive and effective water damage prevention plan (WDPP). This includes routine site inspections to identify uncontrolled water damage exposures and basic maintenance to make sure drains are clean of debris and divert them to a catch basin or low point away from the building. An effective WDPP plan also incorporates technology such as backflow preventers on sewer connections and water sensing technology to monitor the most vulnerable exposures.
Reprinted courtesy of
Andrew Swift, Construction Executive, a publication of Associated Builders and Contractors. All rights reserved.
Read the full story...
"Resilient Rebuild Hub" Helps Wildfire-Impacted Homeowners Build Back Stronger
September 21, 2026 —
California Nevada Cement AssociationNEWPORT BEACH, Calif., Sept. 21, 2026 /PRNewswire/ -- When homeowners in a fire-ravaged Pacific Palisades neighborhood banded together last year to rebuild with fire-hardened materials rather than standard wood framing, they weren't just rebuilding houses: they were rewriting the playbook for how California communities can rebuild after wildfire. Today, the Building with Resilience effort is making that playbook available to every homeowner facing the same decision with the launch of its new Resilient Rebuild Hub for exploring fire resistant, non-combustible construction options.
The Resilient Rebuild Hub helps homeowners understand options for fire-resistant, concrete-based construction and connect with architects, engineers, and contractors who can build them. This includes six noncombustible building systems:
- Insulated Concrete Forms (ICF): stackable, high-density foam blocks filled with concrete which save 20-50% on monthly heating and cooling costs, reduce outside noise by up to 80%, offer exceptional earthquake performance and 4-hour fire resistance rating.
- Insulated Composite Concrete Forms (ICCF): similar formwork to ICF construction with composite materials that enhance strength, simplify installation, and improve long-term performance.
- Concrete Masonry: strong, durable wall systems used for decades across California and the U.S.
- Precast Insulated Sandwich Panels: a complete building enclosure system consisting of two layers of concrete separated by a continuous layer of rigid insulation.
- 3D Shotcrete: air-sprayed concrete for strong, fast, and versatile wall systems that enable a high degree of artistic freedom together with unparalleled fire resistance.
- 3D Concrete Printing: the cutting edge of residential construction, a large-scale robotic 3D printer "squeezes" a specialized concrete mixture layer by layer to allow for organic, curved designs that are often too expensive or impossible to build with traditional methods.
The Resilient Rebuild Hub is available now at buildingwithresilience.com/how-to-build. Each part is free to access and includes case studies, technical resources, and a directory of architects, engineers, and contractors experienced in each building method.
CNCA is a not-for-profit organization committed to developing sustainable and economical construction solutions for California and Nevada with an emphasis on the use of cement and concrete. For more information, visit www.cncement.org.
CalCIMA is a trade association for the construction and essential mineral industries in California, including aggregate, essential and rare earth minerals, ready mixed concrete, and asphalt producers. In all, there are about 70 producer member companies that include 500 production sites in every county of California. Our members also include more than 100 suppliers and service providers to the industry.
Founded in 1930, the National Ready Mixed Concrete Association (NRMCA) is the leading industry advocate with a mission to provide exceptional value for our members by responsibly representing and serving the entire ready mixed concrete industry through leadership, promotion, education and partnering to ensure ready mixed concrete is the building material of choice.
Nordics Are Europe’s Next Data Center Hub
October 05, 2026 — Aarni Heiskanen - AEC Business
On September 9, 2026, Google announced its largest single investment in Europe. The company commits at least €13 billion to Finnish data centers and energy infrastructure in 2027 and 2028, expanding the existing Hamina campus and adding three new sites in Kajaani, Muhos, and Vaala. For the construction sector, this is great news: thousands of hectares, dozens of buildings, and a construction program that will extend well beyond the two-year investment window.
Four Sites, One Regional Cluster
Google is not a newcomer in Finland. Back in 2009, it converted a former paper mill in Hamina into a seawater-cooled data center. It has invested around €4.5 billion there over 15 years, and the site’s waste heat already feeds Hamina’s district heating network. The new program shifts the center of gravity north, to the border of North Ostrobothnia and Kainuu. Read the full story...
Reprinted courtesy of Aarni Heiskanen, AEC Business
Mr. Heiskanen may be contacted at aec-business@aepartners.fi
The “Pay When Paid” Clause in California Construction—Strategies as the Battle Continues
August 03, 2026 — William L. Porter - Porter Law Group
It is well known in California Construction circles that the “Pay If Paid” clause is illegal in this state. There is a great distinction, though, between this clause and a similar clause, known as a “Pay When Paid” clause. A pay if paid clause allows a contractor to tell a subcontractor that if the contractor is unpaid for the subcontractor’s work, then the contractor has no legal obligation to pay the subcontractor, ever. For a great variety of reasons, the California Supreme Court, in the case of Wm. R. Clarke Corp v. Safeco Ins. Co. of America (1997) 15 Cal.4th 882, declared this type of clause illegal in California Construction.
Although the pay if paid clause is illegal in California, the pay when paid clause is still perfectly legal and is found in many subcontracts that contractors issue to their subcontractors. The pay when paid clause allows a contractor to delay paying its subcontractors until the dispute between the contractor and the property owner over payment has been resolved and the contractor is paid by the property owner. Although seemingly reasonable (since it merely delays payment until the contractor is paid by the owner, thereby providing a funding source to pay subcontractors), significant problems still arise. Read the full story...
Reprinted courtesy of William L. Porter, Porter Law Group
Mr. Porter may be contacted at bporter@porterlaw.com
Beyond the Forecast: Managing Extreme Weather Risks on Construction Sites
November 02, 2026 — Jordan Graustark - Construction Executive
Construction leaders would never downplay or dismiss a fall, struck-by incident or equipment failure as “just part of the job.” Yet, some temperature-related conditions, such as heat exhaustion, frostbite and hypothermia, are often accepted as unavoidable consequences of working conditions. Temperature-related incidents likely won’t command the same attention as a crane collapse, but understating their seriousness can be a costly mistake. As extreme weather becomes more frequent and unpredictable, that mindset is becoming increasingly difficult to defend.
Extreme weather is not simply a seasonal inconvenience; it’s a serious occupational hazard. Heat waves, cold snaps and rapid temperature swings can contribute to serious injuries and fatalities—or SIFs—productivity losses and costly project disruptions. A single temperature-related incident can quickly become an OSHA recordable and project management challenge. Reduced physical and impaired cognitive performance from heat or cold stress can increase the risk of workplace incidents long before a medical emergency occurs.
Reprinted courtesy of Jordan Graustark, Construction Executive, a publication of Associated Builders and Contractors. All rights reserved.
Read the full story...
Fraud Allegations Stymie Additional Insured’s Request for a Defense
May 14, 2026 — Tred R. Eyerly - Insurance Law Hawaii
The Federal District Court granted the insurer’s motion to dismiss the insured’s complaint seeking a defense of the underlying case alleging fraud. Renovation Realty, Inc. v. Colony Ins. Co., 2026 U.S. Dist. LEXIS 21409 (S.D. Cal. Jan. 30, 2026).
Mara Fortin sued Renovation Realty and others (“Fortin litigation”) from the fraudulent sale of a residence. The underlying complaint alleged Renovation “deliberately misrepresented of the residence as ‘completely remodeled’ and ‘meticulously maintained’.” The defendants, however, including Renovation, “knew from sources including a pre-renovation termite report documenting fungus and dry rot . . . that the Property harbored pre-existing material defects.” Read the full story...
Reprinted courtesy of Tred R. Eyerly, Damon Key Leong Kupchak Hastert
Mr. Eyerly may be contacted at te@hawaiilawyer.com
Construction Robotics Works Where Variation Ends
August 11, 2026 — Aarni Heiskanen - AEC Business
BuiltWorlds published its 2026 Robotics Top 50 this summer, and the list is genuinely wide. Fifty solutions across nine categories, from 3D printing and prefabricated component manufacturing to earthmoving, demolition, material transport, layout, installation, inspection, and drilling. The honorees come from sixteen countries. It looks like robotics has finally spread across the whole project lifecycle.
However, having vendors in nine categories does not mean that contractors are robotizing their work en masse.
Zacua Ventures, in its 2026 construction robotics report, estimates that on-site robotics accounted for less than 0.03% of global construction spending in 2025. Zacua says: “That is not a failed market. It is a market at the beginning of an adoption S-curve”, while warning that its estimates rest on private vendor data and may be high if vendors overstate how widely their machines are deployed. Read the full story...
Reprinted courtesy of Aarni Heiskanen, AEC Business
Mr. Heiskanen may be contacted at aec-business@aepartners.fi
Texas Adopts New Procedural Rules for Summary Judgment Motions: What You Need To Know
July 13, 2026 — Conor G. Bateman & Marsha Cotton - Snell & Wilmer
On March 1, 2026, sweeping amendments to Texas Rule of Civil Procedure 166a took effect, fundamentally changing how Texas courts handle summary judgment motions — from filing and briefing through disposition. Whether representing a plaintiff or defendant, Texas litigants and attorneys must understand these new rules and their impact on case strategy and timelines. These procedural changes carry particular significance for construction litigants.
Background: The Prior Rule
Texas summary judgment practice has long diverged from the federal model. The Texas Rules of Civil Procedure recognize two types of summary judgment motions: (1) the traditional motion for summary judgment, and (2) the “no-evidence” motion for summary judgment. The no-evidence motion — unique to Texas — may be filed only after adequate time for discovery has passed. No bright-line rule governs that determination; it depends on the unique circumstances of each case.
Reprinted courtesy of Conor G. Bateman, Snell & Wilmer and Marsha Cotton, Snell & Wilmer
Mr. Bateman may be contacted at cbateman@swlaw.com
Ms. Cotton may be contacted at mcotton@swlaw.com Read the full story...
